OneUp Components E-bike Chain Guide Black
OneUp Components E-bike Chain Guide Blue
OneUp Components E-bike Chain Guide Green
OneUp Components E-bike Chain Guide Orange
OneUp Components E-bike Chain Guide Purple
OneUp Components E-bike Chain Guide Red
OneUp Components E-bike Chain Guide Turquoise
OneUp Components E-bike Chain Guide Shimano EP8
OneUp Components Shimano E-bike Chain Guide

E-Bike Chain Guide Steps/EP8

1C0699

Regular price€87,95
/
Tax & duties included on orders under €150, excluded on orders over €150.
Shipping calculated at checkout.
Guide Colour

Add some OneUp goodness to your e-bike and eliminate dropped chains forever!

OneUp have designed a new mount to allow riders to fit a guide to e-bikes with Shimano Steps and EP8 motors.

The OneUp STEPS Chain Guide is lightweight and incredibly easy to install and use. The top guide has a tool-free flip feature that allows easy access to your chain for cleaning and maintenance.

Top guide pieces are available in 6 bright colours to perfectly match your OneUp Composite Pedals, Grips and EDC Lite. Compatible with 32T to 38T chainrings.

Weighs just 45g.

  • Shimano STEPS E7000, E8000 and EP8 compatible.
  • Includes black top guide piece. 6 other colours sold separately.
  • Tool-less upper guide flip.
  • Install without removing your cranks.
  • Mounts directly to motor.
  • Single tool install and adjustment (4mm hex).
  • Black Stainless-Steel hardware.
  • Patented US 10,053,188 Other Patents Pending.

UK Delivery

Orders Over £50 – Free (Royal Mail)

Orders Under £50 – £4.95 (Royal Mail)

FedEx £5.95

Our standard delivery time is 3–5 days. We do our very best to deliver orders within this time, but occasionally there are delays outwith our control, caused by either suppliers or couriers.

UK Bike Delivery

We offer free UK delivery on all bikes unless bought through a Ride To Work Scheme.

We don't currently deliver complete bikes outside the UK.

Custom-built bikes can be delivered in kit form (for you to assemble) – we can include shipping to your country in your quote.

International Orders

Due to the number of delivery options, the best way to get a shipping price is to add what you would like to your basket and begin the checkout. You'll be able to see the shipping price before you checkout.

Unless IOSS applies (see below) our website will remove UK VAT. You are likely to be liable for tax and duties in your delivery country.

IOSS - EU Orders Under 150€

Tax and duties will be calculated at the checkout. Once you have paid 20Twenty, you will have nothing to pay in your delivery country.

Full Shipping Information Here

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Spec

  • Weight: 45g
  • Capacity: 32-38T
  • Chainline: 5 mm adjustment
  • Mount: Shimano STEPS/EP8
  • Colour: Black top guide piece included. Blue, Green, Orange, Purple, Red, Turquoise sold separately.
  • Material: Back Plate - 7075 aluminium, Top Guide - glass reinforced thermoplastic.

Fitting Instructions

  1. Remove top guide by removing the front top guide nut with a 4 mm hex (never adjust the rear T25 bolt).
  2. Set slider in the highest position
  3. Hold backplate directly against Shimano motor tabs. Check for clearance between the back side of the guide and the bike frame.
  4. Install mounting bolts loosely and rotate backplate until slider adjustment bolt is directly above the crank axle.
  5. Torque bolts to 5Nm
  6. With crankset and chain installed, use spacer shim block to measure clearance between back plate and chain
  7. Determine the corresponding number of chainline shims required
  8. Assemble top guide with spacers and tighten bolt to 3Nm
  9. Insert a 4 mm hex through the hole in the inner top guide, loosen height adjustment bolt and lower the tool onto the chain.  Torque to 3Nm to set height

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Recently viewed