OneUp Components

Dropper Post Remote V2

  • SALE
  • £39.50
  • Regular price £49.50
VAT included.


A BETTER REMOTE FOR ANY CABLE OPERATED DROPPER

An aluminium remote with an oversized bearing and a super smooth action. The unique lever position allows you to keep a stronger grip on the bars while actuating your post. Don't think twice about dropping your post, even when charging into technical sections. The OneUp lever mimics your R/H shifter's inboard up shift paddle position instead of the usual downshift paddle position of most remotes. This position requires considerably less thumb movement to reach the lever.

NO BLEEDING

The cable setup is quick and easy. The cable clamps at the lever, making shortening the housing length for clean routing a breeze. Unlike a hydraulically actuated dropper, there is no temperature sensitivity and If your remote gets damaged you can still lower or extend your post by removing it from your frame and pushing on the actuator by hand.

Kit includes cable and housing.

Compatible with all cable actuated dropper posts.

Dropper Post Remote v2 Specification

Compatibility

  • 22.2 mm Bar Clamp - All other groups
  • SRAM Matchmaker X - SRAM MMX clamps
  • Shimano I-spec-EV - 12 speed XTR M9100, XT M8100 and SLX M7100 only
  • Shimano I-spec II - 11 speed XTR M9000, XT M8000, SLX M7000 only

Weight:

    • Remote with 22.2 mm Bar Clamp - 46g
    • Remote with SRAM Matchmaker X - 43g
    • Remote with Shimano I-spec-EV - 43g
    • Remote with Shimano I-spec II - 41g

      Dropper Post Remote v2 Installation Instructions

      22.2 mm Clamp
      • Loosely attach the hinged clamp to your handlebar (Left side of brake for SRAM, Right side of brake for Shimano).
      • Attach the remote body to the clamp using your preferred mounting hole.
      • Torque the remote body to the clamp using a 4 mm hex to 3Nm.
      • Loosen the 22.2 mm clamp and rotate the OneUp dropper remote until the remote body is parallel to the brake lever.
      • Snug the 22.2 mm clamp to 1Nm max.
      Shimano I-spec II (11speed M9000, M8000, M6000 only)
      • Remove the lever mounting bolt completely from the left brake using a 4 mm hex.
      • Depress the "Push to Open" button using a 2 mm hex to fully open the brake lever clamp.
      • Remove the plastic spacer from the inside of the lever clamp.
      • Install the OneUp I-spec II adapter into the lever clamp.
      • Loosely reinstall the brake lever clamp onto the handlebar.
      • Attach the remote body to the I-spec II adapter using your preferred mounting hole.
      • Torque the remote body to the I-spec II adapter using a 4 mm hex to 3 nm.
      • Rotate the OneUp dropper remote until the remote body is parallel to the brake lever.
      • Torque the brake lever clamp to the manufacturer's recommendation.
      Shimano I-spec EV (12 speed XTR M9100, XT M8100, SLX M7100 only)
      • Remove the lever mounting bolt completely from the left brake using a 4 mm hex.
      • Depress the "Push to Open" button using a 2 mm hex to fully open the brake lever clamp.
      • Install the OneUp supplied T-nut into the curved recess on the hinged clamp.
      • Reinstall the brake lever clamp onto the handlebar.
      • Install the OneUp supplied IS-EV adapter onto the T-nut.
      • Attach the remote body to the IS-EV adapter using your preferred mounting hole.
      • Torque the remote body to the IS-EV adapter using a 4 mm hex to 3 nm.
      • Rotate the OneUp dropper remote until the remote body is parallel to the brake lever.
      • Torque the IS-EV adapter bolt to the brake clamp using a 4 mm hex to 3 nm.
      SRAM Matchmaker X
      • Remove Brake lever mounting screw and hinged clamp using a T25 Torx.
      • Install the OneUp supplied T-nut into the curved recess on the hinged clamp.
      • Reinstall the brake lever clamp onto the handlebar.
      • Install the OneUp supplied Matchmaker X adapter onto the T-nut.
      • Attach the remote body to the Matchmaker X adapter using your preferred mounting hole.
      • Torque the remote body to the Matchmaker X adapter using a 4 mm hex to 3 nm
      • Rotate the OneUp dropper remote until the remote body is parallel to the brake lever.
      • Torque the IS-EV adapter bolt to the brake clamp using a 4 mm hex to 3 nm.


      Customer Reviews

      Based on 20 reviews
      90%
      (18)
      10%
      (2)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      N
      Nigel M.

      Very good thanks

      M
      Martin E.
      Dropper Post Remote V2

      great dropper post lever , bought to replace the original Fox one that the post came with, this has a smooth actuation as it runs on a bearing - now have this on on two bikes.
      great service from 20Twenty store

      G
      Glenn B.
      Nothing like having the correct size

      Being tall you always have to compromise on things but not any more this 240mm dropper is perfect and works very nicely

      J
      James W.
      Amazing Dropper and Amazing Service

      A top quality dropper paired up with some amazing service from the folks at 20twenty, thanks for your help Mike!

      h
      hugh c.
      Best value dropper lever

      Excellent service from the shop. Really fast delivery. Fitted to spank spike vibrocore bars, using with one-up v2 dropper post although would work with any cable actuated post which clamps at the lever end. To replace wolftooth light action lever which I had no complaints with. Wolftooth feels a bit more sturdy by in terms of function there's nothing in it and the one-up is a fair bit cheaper. Time will tell but 6 weeks in and going great.

      Item is added to cart